Thursday, March 19, 2009

PInlever or jeweled lever

The escapement is the part of a mechanical timepiece that sets the rate. It is the most crucial part to accuracy. The escapement on a watch is made up of the balance, hairspring, fork and escape wheel. (Click the picture to enlarge enough to read the labels. Picture is a 17 jewel Chinese skeleton watch. The part marked "fork" is the lever) The balance wheel and hairspring combine run at a particular rate, generally between 3 to 8 ticks per second. This is based on the elasticity of the hairspring and the mass and weight distribution of the balance. Adding weight or increasing the effective diameter of the balance will slow the rate down. Increasing the length or decreasing the springiness of the hairspring will also slow the rate down. Older watches were "tuned" roughly by adding or removing tiny screws and washers to change the weight of the rim. Ideally these would be added in pairs, so as not to change the poise (see below). Watchmakers would have packages of washers, each adding a certain number of seconds. Fine adjustment would be made with the regulator, a movable slot that slides along the hairspring, changing the effective length. The mainspring attempts to turn the gears in the watch. The gears transmit this power to the escape wheel. When it rotates, it pushes on one arm of the lever, which in turn "kicks" the balance and causes it to rotate. The other arm of the lever blocks the escape wheel from turning more than 1/2 tooth. When the balance turns, it winds the hairspring until the hairspring is tight enough to make the balance go the opposite direction. The balance will then begin to move the lever--When the lever is released the arm blocking movement of the escape wheel releases it, gets another kick, and the first arm moves to block the escape wheel. This process repeats 3-8 times per second, depending on the watch. Consistency is the key to a well-running watch. Temperature, position, how far the watch is wound, magnetism and friction all have an affect on the rate. Much of the cost of a fine movement is in counteracting these errors. If the balance wheel is not perfectly poised (balanced), it will change how it rotates depending on the orientation of the watch-it may run differently when stem up than when stem down. This is known as positional error. On screwed balances this is adjusted by moving individual washers or screws from one screw position to another--This would keep the overall mass (and therefore the overall rate) the same, but change the poise. On smooth balances this is done by removing material from the proper spot on the balance rim. Traditional steel hairsprings change their elasticity or "springiness" at different temperatures. Old high-grade watches would counter this by having split bimetalic balances with screws. The rim of the balance was made of a sandwich of different metals, with different expansion properties, similar to a metal thermometer. Each half of the rim is attached at one end only, the other is free to move based on the temperature. Adding weight to the free end will increase the amount of temperature compensation. Adding weight to the rim near the spokes has little to no effect on temperature compensation. By moving pairs of washers to matching positions on their respective halves of the balance, temperature compensation could be adjusted without affecting poise or average rate. In the 20's, a new class of spring materials were invented that have little temperature sensitivity at normal temperatures. This allowed a smooth solid balance to equal the temperature performance of a bimetalic balance. While the rest of the movement can cause timekeeping errors, the escapement is key. Rough parts will not be as consistent as smooth, and will wear faster. Jewels in a mechanical watch are used to reduce wear and friction in critical areas. In modern watches these are synthetic sapphire or ruby. In watches before about 1902, these were actual mined gemstones--Sapphire or ruby for good watches, garnet for less expensive ones, and occasionally diamond for super grade watches. The typical jeweled wristwatch uses an anchor escapement, named after the shape of the lever. It will be at the same level as the escape wheel, and uses angled jewels glued in place where it contacts the escape wheel teeth. This gives the most consistent operation, and the best resistance to wear, but requires extreme precision in both manufacture and assembly. Jeweled lever watches would typically come in either 7 jewel models, or odd numbers between 15 and 23. 7 is enough to properly jewel the entire escapement. 17 adds jewels to all the train pivots. Jewels above 17 are of marginal value, and jewels above 23 are essentially useless. (This is only counting the jewels in the basic timekeeping section, not in additions like automatic wind modules) Watches with a single jewel are not considered jeweled. The picture to the left is of 3 watch levers--The one above the date is a jeweled lever, the clear red blocks are jewels. A pinlever is more forgiving. giving up precision in operation and long-term durability for ease of manufacture and in some cases impact resistance. The pinlever is simpler, usually stamped sheetmetal rather than the more complicated assembly of a jeweled lever. It sits below the level of the escape wheel, with round pins extending up to engage the escape wheel teeth. The shape of the pins requires a different shape of escape wheel teeth, and the interaction of these parts is compromised. Friction is higher, and is generally compensated by using a stronger mainspring, which also adds wear. These may use a layout similar to the anchor, or have a different angle between the pins and the tail. Both levers behind Lincoln's head are pinlevers. Pinlever watches are most often either unjeweled (the traditional mechanical Timex) or have a single jewel (most Swiss and Hong Kong pinlevers). There were some pinlever watches with jeweled pivots--many of these would get extra useless jewels so they could claim "17 jewels" or more. These were a bit better than their unjeweled cousins, but not as good as a seven jewel with a fully jeweled escapement. Timex had a wierd hybrid--a 21 jewel version of their basic unjeweled pinlever, with shaped, jeweled pins.

Saturday, March 14, 2009

Racism

Someone just replied to a months-old post , where I was poking fun at the now-defunct "Gold Fo Ya Mouth". They accused me of being racist. I live in an Ohio town of around 25,000, with a relatively small minority population. I saw little racism. What showed was from people who I considered ignorant, even before I witnessed their racism. I joined the Air force, and was further insulated from racism. I was in my late 20's before I finally realized that there are some otherwise normal but racist people who use the N word and mean it. It was as shocking as discovering that there were relatively intelligent people who don't read for fun, at about the same age. I don't think there are practical differences between races, and any average differences are massively overwhelmed by individual and environmental differences. I am very prejudiced against thugs and thug cultures. What I know of hiphop culture qualifies as thug--glorifying violence, misogyny and crime. It isn't a race thing--I've got the same prejudice against outlaw biker culture and white supremacist culture for the same reasons. My tastes run to practical and functional--I don't like excessive and useless decoration, whether it is grills, gigantic cowboy belt buckles, riced out cars, gigantic monster trucks, or overdone, tacky BBQ guns.

Promotional watch

This is most likely from the 60's or early 70's. It has an aluminum case, although at least this one has a stainless steel back. Inside is a cheap pinlever movement. The dial is printed paper. More than likely this watch was given away as a prize rather than sold.

Aluminum cases were not successful in their original versions--The aluminum was soft, and the protective coating would scratch easily. This would let the aluminum pit badly, even worse than plated brass.

This particular watch is an interesting variation on the "mystery dial" watch. Mystery dial watches use disks with pointers instead of hands, giving the illusion that the pointers are floating. The most common type has conventional hour and minute hands, and uses a disk for seconds, often with an animal or vehicle "running" around the perimeter of the dial.

This watch also uses a disk, but for a different purpose--It retains the seconds hand, and the disk is polarized. There is another polarized disk covering the dial. When the disks are oriented so the polarization crosses, the dial appears black, as this .

When the polarized disks align, the logo under the bottom disk appears:


So using 60's or earlier technology, they were able to make a watch with a disappearing and reappearing face, cheap enough to be a givaway.

Friday, March 06, 2009

Good Watch

Dad has a Seiko Automatic from 1971 that Mom bought him new. He wore it daily for many years, and still wears it occasionally. He worked construction during the summers while in college, and often his watch was the only one on the crew that wasn't fogged up to unreadability. It is probably seeing him with this watch (and its nearly identical quartz replacement) that shaped my view of an elegant everyday watch--Silver-white dial, simple stick markers, stainless steel case. Around 1992, Mom and Dad bought me my own quartz version, pictured here. It was basically abused for 13 years or so--I rarely took it off even to shower or swim.

When Mom bought Dad's first Seiko, the brand was fairly new to the US market, although they had made either movements or entire watches for US brands--The top of the line Timex in the late 50's used a Seiko movement. Seiko was brought to the attention of Americans via servicemen returning from Vietnam, and wasn't imported in large numbers until the early 70's. It wasn't a horribly expensive watch, but it certainly qualifies as a good one--I'm not sure there was anything close available in the US at anywhere near the price.

Before quartz, good watches were significantly better in almost every way than cheap watches. The movements would keep better time and last longer, the cases would resist water and wear better and they wouldn't have to be serviced as often. If you wanted something accurate and durable, you had to pay.

That changed with the perfection of quartz. For all practical purposes, a dime-store watch keeps perfect time--within a few minutes per year, and will usualy withstand more abuse. The dime store watch may not last as long overall, but it will generally last as long as the maintenance interval on a mechanical, and replacement will cost less than a single servicing of a mechanical.

Besides looks, what makes a good practical watch today?

Most movements are pretty good. Swiss or Japanese are probably the best, followed by other Asian movements made by Japanese companies. As long as you keep them dry, even the Chinese quartz movements will keep time with good accuracy and last years. These are movements in watches that retail for a few dollars.

The case has become the most important difference. Ideally, the case will be all stainless, NOT "stainless back, base metal bezel. It should be water resistant, with a rated depth or ATM rating. (1ATM is equal to 10 meters) Technically you aren't supposed to shower or swim in a watch with no depth rating. Unless you are diving, an extreme rating doesn't gain much--generally seals either work or they don't.

"Base metal bezel" indicates a brass case, plated with chrome or yellow stuff. Goldtone watches are an exception--it is difficult to plate stainless, so gold-colored watches will be "base metal" to a higher price point. Gold plating or goldtone isn't as durable as chrome, and nowhere near as durable as solid metal.

Band material is personal preference. Leather bands don't last forever, but they are easy to replace. I can't wear ordinary leather bands long in the summer before they start to smell funny. Luckily I bought 45 pounds of watch bands from Ebay, and I've still got a few left... Some really nice leather bands have a "deployant" clasp--Instead of a standard buckle, there is a folding clasp like a metal band. Some people say metal bands pull the hairs on their wrists. This depends on the design of the band--Expansion bands are notorious for pulling hair. Most well-designed metal rarely if ever pull hair. Look at the sides--Cheap bands will be obviously folded metal. Better ones will still be folded, but the finish will be smoother--there will be a finishing operation after the links are folded. The best watches use solid links, and solid end pieces. The clasp on a better metal band will have some sort of extra lock--Buttons on the side, or a flip-lock.

Notice that in addition to the standard lugs, this watch has 2 extra bits attached to the case, to match the style of the band. That is known as an integrated band, and it means you pretty much can't change bands, or switch from metal to leather.

Most mid-grade watches have either flat mineral-glass crystals, or domed plastic. Mineral glass is less likely to scratch, but plastic can be buffed out with trivial effort. Better watches with flat or slightly domed crystals will have sapphire rather than mineral glass. These are very difficult to scratch.

There are some features that can be a problem. Many of the "never needs a battery" --Solar (Ecodrive) or rotor-generator (Kinetic, Auto-quartz) add needless complexity, with little benefit on a standard watch. Modern batteries can last 10 years or more, some of the energy cells in the rechargeable watches don't last much longer and are far more expensive to replace. Casio makes a line of "atomic" watches that set themselves via radio. The ones with both analog and digital display can get out of sync--save the instructions.

The less expensive Seikos and Citizens are really good values. Pulsar is a cheaper brand of the Seiko company, using the same movements. Most Pulsars are base metal, but there are some with stainless cases--These are essentially a Seiko. Casio G-Shocks are among the most durable in withstanding abuse, although their newer models don't have quite the reputation of the early ones.

Gruen, Waltham (in North America) and Elgin used to be high quality watches, but are now basic cheap base metal watches, all owned by the same company that does Sharp, Watch-it and Dickies watches. Bulova hasn't slipped quite as far, but it is nowhere near the quality it used to be, and some of their least expensive watches aren't much better than you would find at Walmart. (Bulova has recently been purchased by Citizen, who used to make watches for Bulova's budget Caravelle line)

Fossil and Diesel (same company) have neat looking features, but their cases are rarely above average--In fact, some of their cases with snap-on backs are a significant problem, fitting so tight as to be nearly impossible to replace without damaging the watch.

Tuesday, March 03, 2009

Ringtone rant

I had to buy a ringtone for my new phone, and I object. Under normal circumstances I'm a cheapskate, and since I've got about 2 1/2 months to find a job before I go on unemployment, I'm even more frugal at the moment.

I hardly talk on the phone, so I've got Virgin Mobile's cheapest--pink, because the black phone was an extra $5. The tones on it are mostly hip and cool, but they are apparently designed for younger ears than mine. There's a muffled sounding video game theme, someone sort of panting over music, a male voice mumbling about music over music, a female voice mumbling and giggling over music, and one actual phone sound which would have been OK, except it is the one my wife uses.

None of the included musical ones are easy to distinguish over background noise.

I wound up with the intro to Baba O'Riley:


I'm a fan of The Who, but the primary consideration was that it is something I can actually hear. This isn't my favorite song (although it is better than average) but it is the best bit of a song I could think of for use as a ringtone.

It seems wrong to pay more for a fraction of a song than the whole song would cost on iTunes. On the other hand, it is astounding that even after buying the ringtone, the total is still under $20 for a phone that doesn't have the rest of the price buried in a multi-year contract.